Zoeller Shark Collection 10-0420 Control Panel Auto Reversing Circuit Simplex

The control panel can be housed in a NEMA 4X enclosure and be of a simplex design which controls a single pump from a 3-float system or a duplex design which controls two pumps in an alternating lead/lag cycle sequence from a 3 or 4-float system. The panel contains the required starting, control, & alarm circuits. Rated motor starters and circuit breakers are required for each pump. The 115 volt control circuit will have short circuit protection. The panel will have pump run pilot light(s) and pump & alarm selector switches. The panel will be equipped with circuit(s) which automatically reverses the direction of the cutter blades. A seal leak indicator light is required as well as a thermal cut-out connection for 3 phase systems. A padlock hasp will be provided. High water conditions will be indicated by a visible light with polycarbonate cover. Numbered terminal strips are required. A wiring schematic and trouble shooting guide will be included with each panel. The panel will be UL listed and be labeled a...