USP CIA-GEL 7000 Gray Epoxy Adhesive

Structural adhesive specifically designed to attach anchor bolts into fully grouted concrete masonry units. Usable with either cracked or uncracked concrete. Evaluated to ICC-ES AC58 for seismic, sustained load, elevated temperature and freeze-thaw suitability conditions. Can also be used to install anchor bolts into uncracked concrete and reinforced brick. Low odor, solvent free, non-shrink adhesive. Two-component (resin and hardener) epoxy is supplied in equal volume cartridges, which are combined in a 1:1 ratio when dispensed through the attached mixing nozzle. Either a hand powered or air-powered dispenser may be used. Cartridges are sealed with a D-plug which opens easily on the jobsite and allows partially used cartridges to be saved for later use. One year shelf life when stored in unopened containers at a temperature of 21°C/70°F.