Sunstone 6 in. 304 Stainless Steel Spacer Panel for Cabinet Back

The Sunstone 6 in. Spacer Panel for Back of Cabinet is perfect for adding the perfect little extra space between two cabinets. The Panel is measured at 6 in. W x 34-1/2 in. H including Kick Plate. It is constructed with all 304 Stainless Steel with a #4 Brushed Finish matching with all other Sunstone Cabinets and products. It is easily installed with simple Pin-Locks, simply align any 2-opposing cabinets next to one another, simply lift, and Drop the panel in between the two - pushing down to secure tight in position. Most often this Panel will be used for adding extra needed spacing between 2-cabinets, adding more space the top side grill, sink or tightening up any gaps in your overall cabinet width installation area. Be sure to additionally purchase the opposing 6 in. Front Panel Item No. SCC6SPF, as this panel is for the Back of cabinets and is typically only used for when a Cabinet Island is not installed against a wall and the back of cabinets are exposed. This Spacer Panel is not needed if your Cabin...