Pioneer Pioneer Add-On Blind Spot Detection System

* GPS Antenna Included The SDA-BS900 comes with a GPS antenna, which is used to calculate your vehicle’s relative moving speed. On startup, it may take up to 2 minutes to engage; once engaged, both LED indicators will flash twice to indicate the GPS system is active. The factory default is set to detect and warn at speeds above 18 mph. At speeds under 18 mph, objects will not be detected. * Bumper Radar Sensors with built-in Control Unit Installation The SDA-BS900 can only be installed behind plastic bumpers and cannot be placed behind metal bumpers. When mounting the sensors, ensure the sensors are not obstructed by any metal objects, which could result in false readings. Placement of the sensors should be in the rear corners of the bumper, perpendicular to the ground, and should be between the lowest line of the taillight and the highest line of the fog light. * IPX6 and IPX7 Rating The SDA-BD900 bumper radar microwave sensors with built-in Control Units are IPX6 and IPX7 rated. * Blind Spot Reading Accu...