Microchip Tag-Connect In-Circuit Cable No Legs TO-220

The three locating pins align the connector’s pins with the pads on the PCB also ensuring the connector can’t be located the wrong way around. The connector is hand held to the board while a fast programming operation takes place making for a very efficient production programming operation. The connector’s steel pins can also be soldered to the board (stainless-steel soldering flux might be needed) for a semi-permanent debugging connection and other means of holding it in place are also available. The other end of the cable terminates in a 6P6C modular plug and connects directly to your debugger or programmer.. Chemically resistant standard housing. Contacts normally closed or normally open. Normally open contact closes with rising temperature. Normally closed contact opens with rising temperature. General specifications in accordance with MIL Std. 202 div.