Metra Receiver Wiring Harness

This vehicle-specific wiring harness makes connections between your new car stereo and your car's electrical system. First, attach the color-coded wires on your Crutchfield-supplied harness to the wires from your new stereo. If you're not using a soldering iron, we recommend that you purchase some wire connectors to secure the connections. Check out our handy article on three ways to connect the wiring harness here . Now, once this harness is connected to your new stereo, you'll be able to plug right into your car's factory radio connector. This harness saves installation time since you won't have to cut factory wires individually, and this also enables you to re-install the factory radio if needed. A detailed instruction sheet comes with the harness. Warranty: 60 days. Installation Note: This harness uses your factory amplifier; your new stereo must have two pairs of preamp outputs to connect this harness. Please read this important note: This harness may not contain provisions for every wire needed to co...