HT Instruments EV-TEST100 Test adapter Test adapter for E-charging stations 1 pc(s)

The EV-Test100 was developed as an accessory especially for testing E-charging stations. It can be used to simulate charging states and test the effectiveness of protective measures on Type 3 E-charging stations with a Type 2 connector. The easy handling in combination with the Combi G3 or Combi G2 is guaranteed. Measurement functions Universal 4mm sockets for connection with a 1 or 3-phase installation tester with test leads (banana plug) Separate phase display by three LEDs for easy voltage testing Proximity Pilot (PP) rotary switch for simulating different current capacities of charging cables Control Pilot (CP) rotary switch for simulating the electric vehicle status A, B, C D. Rotary switch error to simulate a short circuit between CP and PE (State E = error) Simulation of PE error (ground fault) Connection for the CP signal output to check the communication between the adapter (=simulated electric vehicle) and charging station Type 2 plug for connection to the charging station also included Permanent...