EZ-FLO 30/50 Pressure Switch for Sump Pumps

The EZ-FLO Well Pump Water Pressure Switch is for the control of electric water pumps. This switch can be used with jet pumps, submersible pumps and reciprocating pumps. The pressure switch is factory set to signal the pump to start when the water system drops to 30 psi and stop at 50 psi. The switch has a 1/4 in. pressure connection.Factory preset to automatically turn the pump on at 30 psi and off at 50 psi1/2 in. knockout for electrical line and can be wired 115-Volt or 230-VoltMotor wires are connected to the 2 middle posts (color does not matter) and breaker box wires are connected to 2 outside posts (color does not matter)1/4 in. - 18 NPSF connectionCap removes for easy adjustment and the 2-spring design allows for adjustment of cut-in and cut-out pressure settings1/4 in. - 18 NPSF connectionCap removes for easy adjustment and the 2-spring design allows for adjustment of cut-in and cut-out pressure settingsCalifornia residentssee Prop 65 WARNINGS