User's Manual

Chapter 4 Status Screens
NWA-3500/NWA-3550 User’s Guide
85
WLAN1
Associations
This field displays the number of wireless clients currently
associated with the first wireless module. It supports up to 128
concurrent associations.
WLAN2
Associations
This field displays the number of wireless clients currently
associated with the second wireless module. It supports up to
128 concurrent associations.
Interface Status
Interface This column displays each interface of the NWA.
Status This field indicates whether or not the NWA is using the interface.
For each interface, this field displays Up when the NWA is using
the interface and Down when the NWA is not using the interface.
Rate For the LAN port this displays the port speed and duplex setting.
For the WLAN interface, it displays the downstream and
upstream transmission rate or N/A if the interface is not in use.
SSID Status
Interface This column displays each of the NWA’s wireless interfaces.
SSID This field displays each of the SSIDs currently in use.
BSSID This field displays the MAC address of the wireless adaptor.
Security This field displays the type of wireless security used by each
SSID.
VLAN This field displays the VLAN ID of each SSID in use, or Disabled if
the SSID does not use VLAN.
System Status
Show Statistics Click this link to view port status and packet specific statistics.
See Section 4.2.1 on page 86.
Association List Click this to see a list of wireless clients currently associated to
each of the NWA’s wireless modules. See Section 23.2 on page
280.
Channel Usage Click this to see which wireless channels are currently in use in
the local area. See Section 23.3 on page 281.
Logs Click this to see a list of logs produced by the NWA. See Chapter
19 on page 239.
Rogue AP List Click this to see a list of unauthorized access points in the local
area. See Section 15.2.2 on page 196.
Table 8 The Status Screen
LABEL DESCRIPTION