User's Manual

Chapter 3 Tutorial
NWA-3500/NWA-3550 User’s Guide
42
3.2.2 Wireless LAN Configuration Overview
The following figure shows the steps you should take to configure the wireless
settings according to the operating mode you select. Use the Web Configurator to
set up your NWA’s wireless network (see your Quick Start Guide for information
on setting up your NWA and accessing the Web Configurator).
Figure 13 Configuring Wireless LAN
Select Operating Mode .
Access Point
Bridge /
Repeater
Mode.
AP + Bridge
Mode.
MBSSID
Mode.
Select
802.11
Mode and
Channel ID .
Select
SSID
Configure SSID Profile.
Edit Security Profile .
Configure
RADIUS
authentication (optional).
Configure internal
AUTH.
SERVER (optional).
Configure
Layer 2
Isolation
(optional).
Configure
MAC Filter
(optional).
Select
802.11
Mode
and
Channel ID .
Configure
WDS Security .
Select
802.11 Mode
and Channel ID .
Configure
WDS Security .
Select
SSID Profile .
Configure
SSID Profile .
Edit
Security Profile .
Configure RADIUS
authentication (optional).
Configure internal
AUTH.
SERVER (optional).
Configure
Layer 2
Isolation
(optional).
Configure
MAC Filter
(optional).
Select
802.11
Mode and
Channel ID .
Select
SSID
Profiles
Configure each
SSID Profile .
Configure each
Security Profile .
Configure
RADIUS
authentication
Configure internal
(optional).
Configure
Layer 2
Isolation
(optional).
Configure
MAC Filter
(optional).
AUTH. SERVER
(optional).
Mode.
Profile .
.
Check your settings and test.