User's Manual

Vantage Access User’s Guide
93
CHAPTER 4
Initial Setup
This chapter shows you how to configure the download server and register a ZyXEL device in
Vantage Access.
4.1 Specifying a Download Server
You must specify a server to store device firmware and configuration files and perform
automatic remote firmware upgrades or configuration restores on the devices.
1 Log into the web configurator as root (the default user name is “root” and the default
password is “root”) and click the System Manager icon in the Control Panel.
2 Click Download Server in the navigation panel to display the configuration screen.
Figure 29 System Manager: Download Server
3 In the IP Address field, enter the IP address of the download server in dotted decimal
notation.
" If the download server and Vantage Access are installed on the same computer,
you must use a different port number for the download server and specify the
port number. For example, if the download server (192.168.100.1) is using port
8080, then enter “192.168.100.1:8080” in the IP Address field.
4 Set the User Name and Password fields to access the download server. If you have
changed the default settings (“zyxel” and “1234”) during the installation process, enter
the new account information. The account user name and password are case sensitive.
5 Click Apply to save the settings.