User's Manual

Chapter 2 Installation

Vantage Access User’s Guide

2 Enter ./Vantage_Access_HTTPD.bin -i console to start the installation

process.

3 Press [ENTER] at the prompt to continue.

4 Specify the file location or press [ENTER] to accept the default location and continue.

[root@localhost vantage]# ./Vantage_Access_HTTPD.bin -i console

Preparing to install...

Extracting the JRE from the installer archive...

Unpacking the JRE...

Extracting the installation resources from the installer archive...

Configuring the installer for this system's environment...

Launching installer...

Preparing CONSOLE Mode Installation...

===============================================================================

(created with InstallAnywhere by Zero G)

-------------------------------------------------------------------------------

===============================================================================

Introduction

------------

InstallAnywhere will guide you through the installation of Tr069_httpd.

It is strongly recommended that you quit all programs before continuing with

this installation.

Click the 'Next' button to proceed to the next screen. If you want to change

something on a previous screen, click the 'Previous' button.

You may cancel this installation at any time by clicking the 'Cancel' button.

PRESS <ENTER> TO CONTINUE:

===============================================================================

Choose Install Folder

---------------------

Select a folder which you would like to install Vantage Access HTTPD.

Where Would You Like to Install?

Choose installation folder: /usr/local/ (DEFAULT: Tr069_httpd)