User's Manual

Chapter 37 Diagnostic Manager
Vantage Access User’s Guide
568
37.3.1 Adding a Diagnostic Test
Use this screen to add a diagnostic test to the list. Click Add in the Diagnostics Manager >
Diagnostic Tests screen. The following screen displays.
Figure 536 Diagnostics Manager: Diagnostic Tests: Add
The following table describes the labels in this screen.
Go Enter a page number and click Go to display the entries in that screen.
Add Click this to add a diagnostic test to the list.
Delete Click Delete to remove the selected file(s).
Replace Click this to replace the selected diagnostic test.
Table 333 Diagnostics Manager: Diagnostic Tests
LABEL DESCRIPTION
Table 334 Diagnostics Manager: Diagnostic Tests: Add
LABEL DESCRIPTION
Keyword Enter a search term and click Search to find matching devices.
# Select the device upon which to perform the selected diagnostic test.
Name This displays the device name.
OUI-SN This displays the device’s OUI and serial number.
Type This displays the device’s model number.
SW Version This displays information about the firmware the device is using.
Next Click Next to go to the next screen.
First This link is not available in the first screen.
Click First to return to the first screen.
Prev Click Prev to go to the previous screen.
Last This link is not available in the last screen.
Click Last to go to the last screen.
Go Enter a page number and click Go to display the entries in that screen.