User's Manual

Chapter 37 Diagnostic Manager
Vantage Access User’s Guide
567
37.3 Diagnostic Tests
Use this screen to view and manage scheduled diagnostic tests. Click Diagnostics Manager >
Diagnostic Test. The following screen displays.
Figure 535 Diagnostics Manager: Diagnostic Tests
The following table describes the labels in this screen.
Email Enter an email address and click Add to include it in the list. Addresses in
the list receive an email when the task is completed.
Select an address in the list and click Remove to delete it from the list.
Back Click this to return to the previous page without saving any changes.
Apply Click this to save your changes and return to the previous page.
Cancel Click this to return in this screen to their last-saved values.
Table 332 Diagnostics Manager: Telnet: Add or Edit Task
LABEL DESCRIPTION
Table 333 Diagnostics Manager: Diagnostic Tests
LABEL DESCRIPTION
Entries Per Page Select how many entries you want to display in a page.
# Select this option and click Delete to remove the test(s).
Click Select All to select all entries in this screen.
Name This displays the name of the managed device to be tested.
OUI-SN This displays the OUI and serial number of the managed device to be
tested.
Type This displays the type of test to be performed.
Status This displays the current status of the diagnostic test (Initiated, Timeout or
Finished).
Time This displays the time at which the diagnostic test was added.
Next Click Next to go to the next screen.
First This link is not available in the first screen.
Click First to return to the first screen.
Prev Click Prev to go to the previous screen.
Last This link is not available in the last screen.
Click Last to go to the last screen.