User's Manual

Chapter 37 Diagnostic Manager
Vantage Access User’s Guide
564
37.1.1 Adding a Telnet File
Use this screen to add a telnet task file to the telnet file list. Click Add in the Diagnostics
Manager > Telnet > File Management screen. The following screen displays.
Figure 532 Diagnostics Manager: Telnet: Add File
The following table describes the labels in this screen.
37.2 Task Management
Use this page to view, edit or delete scheduled, immediate or recurrent telnet tasks. Click
Diagnostics Manager > Telnet > Task Management. The following screen displays.
Figure 533 Diagnostics Manager: Telnet: Task Management
Table 330 Diagnostics Manager: Telnet: Add File
LABEL DESCRIPTION
Telnet Task File Enter the file path of the telnet command file to upload, or click Browse... to
select the file to upload.
File Example Click the link to download an example of the telnet command CSV
(Comma-Separated Value) file.
Description Enter a description of the file.
Back Click this to return to the previous page without uploading a file.
Apply Click this to upload the file and return to the previous page.
Cancel Click this to clear all fields in this screen.