User's Manual

Vantage Access User’s Guide
563
CHAPTER 37
Diagnostic Manager
This chapter discusses the Diagnostics Manager screens. Use these screens to configure,
schedule and perform a wide range of tasks on managed devices.
37.1 Telnet File Management
Use this screen to manage telnet files used for troubleshooting managed devices. These are
CSV (Comma-Separated Value) files that contain a list of the IP addresses, usernames and
passwords of the devices that recewive telnet commands. Click Diagnostics Manager >
Telnet > File Management. The following screen displays.
Figure 531 Diagnostics Manager: Telnet: File Management
The following table describes the labels in this screen.
Table 329 Diagnostics Manager: Telnet: File Management
LABEL DESCRIPTION
Entries Per Page Select how many entries you want to display in a page.
# Select this option and click Delete to remove the telnet file(s).
Click Select All to select all entries in this screen.
Task file name This is the telnet file name.
Description This is a short description of the telnet file.
Next Click Next to go to the next screen.
First This link is not available in the first screen.
Click First to return to the first screen.
Prev Click Prev to go to the previous screen.
Last This link is not available in the last screen.
Click Last to go to the last screen.
Go Enter a page number and click Go to display the entries in that screen.
Add Click this to add a telnet file to the list.
Delete Click Delete to remove the selected file(s).