User's Manual

Chapter 30 Account Management
Vantage Access User’s Guide
527
Figure 507 System Manager: User Management: Add User
The following table describes the labels in this screen.
Table 309 System Manager: User Management: Add User
LABEL DESCRIPTION
State Select Enable to activate this account.
Select Disable to deactivate this account. In this case, you cannot log in using this
account.
Level Specify the account type.
Select manager to create a manager account.
Select call-center to create an account for your call center operation.
Name Enter the name of the person using this account. You can enter up to 250
characters (0-9, A-Z, a-z, -, _ with no spaces).
Login ID Specify the user name for this manager account. You can enter up to 32
characters (0-9, A-Z, a-z, -, _ with no spaces).
Password Specify the password associated to this account. You can enter up to 12
characters (0-9, A-Z, a-z, -, _ with no spaces). The characters are displayed as
asterisks “*” in this field.
Password
Confirm
Specify the login password again for confirmation.
Email Address Specify the e-mail address (up to 250 characters) of the person using this
manager account. You must enter a valid e-mail address in the format
[e-mail]
Description Enter additional information about this account. You can enter up to 250
characters (0-9, A-Z, a-z, -, _ and spaces are allowed).
IP Span Allowed If you want to restrict the IP address from which this user may log in, enter the
range of allowed IP addresses in this field. If you do not want to place a limit, leave
this field blank.
Expire Date Enter the date on which this user account will be disabled in yyyy-mm-dd format.
Alternatively, click the calendar icon to select the date from the calendar.
Back Click this to return to the previous screen.
Apply Click Apply to save the settings and return to the main User Management
screen.
Reset Click Reset to start configuring this screen again.