User's Manual

Chapter 25 LAN
Vantage Access User’s Guide
485
25.5 Traceroute Diagnostics
Use the TraceRouteDiagnostics screen to view or configure traceroute test settings for a
device.
Select a registered device in the Device List window and click Device > LAN. Click
TraceRouteDiagnostics.
Figure 475 TR-106: LAN: TraceRouteDiagnostics
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
MinimumRespons
eTime
This field displays the minimum response time (in milliseconds) of all ping tests.
MaximumRespon
seTime
This field displays the maximum response time (in milliseconds) of all ping tests.
Table 287 TR-106: LAN: DHCPOption: Details (continued)
PARAMETER
NAME
VALUE
Table 288 TR-106: LAN: TraceRouteDiagnostics
PARAMETER
NAME
VALUE
DiagnosticsState This field displays the availability of the diagnostics result.
Host This field displays the name or the IP address of the host device to which to trace
route.
Timeout This field displays the timeout (in milliseconds) for a trace route test.
DataBlockSize This field displays the size of the data block (in bytes) to send for each traceroute.
MaxHopCount This field displays the maximum number of hops used in outgoing probe packets.
DSCP This field displays the DiffServ Code Point (DSCP) value for the outgoing probe
packets.
ResponseTime This field displays the response time (in milliseconds) of the most recent
traceroute test.
NumberOfRouteH
ops
This field displays the number of hops for the discovered route.