User's Manual

Chapter 25 LAN
Vantage Access User’s Guide
484
25.4 IP Ping Diagnostics
Use the IPPingDiagnostics screen to view or configure IP Ping test settings on a device.
Select a registered device in the Device List window and click Device > LAN >
IPPingDiagnostics to display the screen.
Figure 474 TR-106: LAN: DHCPOption: Details
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
QuaterHourPacke
tsSent
This field displays the number of packets transmitted on the LAN since the
beginning of the quarter-hour interval as specified by the QuaterHourInterval
parameter.
QuaterHourPacke
tsReceived
This field displays the number of packets received on the LAN since the beginning
of the quarter-hour interval as specified by the QuaterHourInterval parameter.
Table 286 TR-106: LAN: Stats (continued)
PARAMETER
NAME
VALUE
Table 287 TR-106: LAN: DHCPOption: Details
PARAMETER
NAME
VALUE
DiagnosticsState This field displays the availability of the diagnostics result.
Host This field displays the name or the IP address of the host device to ping.
NumberOfRepetiti
ons
This field displays the number of ping tests to perform before reporting the test
result.
Timeout This field displays the timeout (in milliseconds) for a ping test.
DataBlockSize This field displays the size of the data block (in bytes) to send for each traceroute.
DSCP This field displays the DiffServ Code Point (DSCP) value for the ping packets to
send.
SuccessCount This field displays the number of successful ping tests.
FailureCount This field displays the number of unsuccessful ping tests.
AverageRespons
eTime
This field displays the average response time (in milliseconds) of all ping tests.