User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
468
23.7 STB Audience Statistics
You can view the audience statistics settings in the Applications > Audience Statistics
screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number, Applications and then AudienceStats to display the screen.
Figure 460 TR-135: STBService: Applications: Audience Statistics
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.7.1 Channel Settings
You can view the channel settings in the Channel screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number, Applications, AudienceStats and then Channel to display the screen.
Metric1Failures This displays the number of times, since the last time this main stream and
sample statistics collection were enabled, that a new value of Metric1 was
less than or equal to the Metric1Threshold.
Metric2Failures This displays the number of times, since the last time this main stream and
sample statistics collection were enabled, that a new value of Metric2 was
less than or equal to the Metric2Threshold.
Table 275 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetric Details
PARAMETER NAME VALUE
Table 276 TR-135: STBService: Applications: Audience Statistics
PARAMETER NAME VALUE
Enable This displays whether the collection of viewing statistics is enabled.
Reset This displays whether the viewing statistics table is reset. When this value it is
read, it is always false.
ResetTime This displays the number of seconds since the audience statistics were last
enabled or reset.
ChannelNumberOfEnt
ries
This displays the number of Channel instances.