User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
467
Figure 458 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetricStats
23.6.18 Main Stream High Level Metric Sample Statistics Details
You can view information about each Main Stream instance’s high level metric statistics
during the sample interval in the detailed HighLevelMetricStats screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and ServiceMonitoring.
3 Click MainStream, then click a number to display the screen.
4 Click Sample, then click HighLevelMetricStats.
5 Click a number to display the screen.
Figure 459 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetric Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 275 TR-135: STBService: ServiceMonitoring: MainStream HighLevelMetric Details
PARAMETER NAME VALUE
MetricName This displays the name associated with the high-level metric.
Metric1Threshold This displays the value controlling the of the Metric1Failures parameter.
Metric2Threshold This displays the value controlling the of the Metric2Failures parameter.
SampleSeconds This displays the number of seconds during which this high level metric’s data
was collected, for this AV stream, during the sample interval.
Metric1 This displays a high level metric calculated for this AV stream during the
sample interval. A lower value represents an inferior QoE than a higher value.
Metric2 This displays a second high level metric calculated for this AV stream during
the sample interval. A lower value represents an inferior QoE than a higher
value.