User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
459
Figure 451 TR-135: STBService: ServiceMonitoring: MainStream Sample Statistics
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.6.11 Main Stream Dejittering Sample Statistics
You can view information about each Main Stream instance’s dejittering statistics during the
sample interval in the DejitteringStats screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and ServiceMonitoring.
3 Click MainStream, then click a number to display the screen.
4 Click Sample, then click DejitteringStats.
Figure 452 TR-135: STBService: ServiceMonitoring: MainStream Dejittering Sample Stats
Table 268 TR-135: STBService: ServiceMonitoring: MainStream Sample Statistics
PARAMETER NAME VALUE
SampleSeconds This displays the number of seconds during which data was collected for this
AV stream, during the sample interval.
SignificantChanges This displays the total number of times that a potentially disruptive event
occurred for this AV stream during the sample interval.
PVRTimeShift This displays whether PVR was used at any time for this AV stream, during
the sample interval.
HighLevelMetricStats
NumberOfEntries
This displays the number of HighLevelMetricStats instances.