User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
440
23.3.35 Video Decoder Details
You can view information about each video decoder instance in the detailed VideoDecoder
screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click a number and VideoDecoder.
4 Click a number to display the screen.
Figure 424 TR-135: STBService: Components: VideoDecoder Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.3.36 Audio Output Status
You can view information about audio output instances in the AudioOutput screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
Table 249 TR-135: STBService: Components: VideoDecoder Details
PARAMETER NAME VALUE
Enable This displays whether or not the video decoder instance is enabled.
Status This displays the status of this video decoder.
Name This displays the name associated with this video decoder.
MPEG2Part2 This displays the path name of the MPEG2 Part 2 profile and level object
instance.
MPEG4Part2 This displays the path name of the MPEG4 Part 2 profile and level object
instance.
MPEG4Part10 This displays the path name of the MPEG4 Part 10 profile and level object
instance.
SMPTEVC1 This displays the path name of the SMPTE VC-1 profile and level object
instance.
ContentAspectRatio This displays the native aspect ratio of the content for this decoder.