User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
436
4 Click IP > Outbound to display the screen.
Figure 415 TR-135: STBService: Components: IP: Outbound
23.3.27 Front End Outbound Information Statistics
You can view information about outbound streams in the detailed Outbound screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click FrontEnd.
4 Click IP > Outbound and click a number to display the screen.
Figure 416 TR-135: STBService: Components: IP: Outbound: Details
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.3.28 Front End Service Connections
You can view information about the parameters used to force connection to a dedicated IP
stream for testing purposes in the ServiceConnect screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click FrontEnd.
4 Click IP > ServiceConnect and click a number to display the screen.
Table 244 TR-135: STBService: Components: IP: Outbound Details
PARAMETER NAME VALUE
Status This displays the status of this outbound stream.
MultiplexType This displays the AV multiplex type currently used for the source content.
URI This displays the URI that indicates the current source of the stream content.