User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
425
Figure 398 TR-135: STBService: Components: DVBT Service List Channel Services: Device
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.3.10 DVBT Logical Channel Connections
You can view and configure DVB-T channel connections in the LogicalChannelConnect
screen.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Components.
3 Click FrontEnd.
4 Click DVBT > LogicalChannelConnect to display the screen.
Figure 399 TR-135: STBService: Components: DVBT Logical Channel Connections
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 230 TR-135: STBService: Components: DVBT Service List Channel Services: Device
PARAMETER NAME VALUE
DvbId This displays an ID that uniquely identifies the service in the service list
database.
Frequency This displays the transmitter frequency (in kHz) for this service.
BER This displays the Bit Error Ratio before correction.
Preferred When this is active, this identifies this service as the preferred service for this
logical channel.
Table 231 TR-135: STBService: Components: DVBT Logical Channel Connections
PARAMETER NAME VALUE
LogicalChannelNumb
er
This displays the logical channel number to which the channel’s preferred
service will be connected.