User's Manual

Chapter 23 STB Service
Vantage Access User’s Guide
412
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG4Part2 > ProfileLevel. Click a number to display the
screen.
Figure 376 TR-135: STBService: Capabilities: MPEG4Part2 ProfileLevel Settings
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
23.2.12 MPEG4 Part 10 Setup
You can view and configure MPEG4 Part 10 settings in the MPEG2Part2 screen. This screen
displays the set of supported MPEG4 profiles. It also displays the set of audio standards
supported when MPEG4 Part 10 is used.
1 Select a registered device in the Device List window and click Data Model > Device >
Services > STBService.
2 Click a number and Capabilities.
3 Click Video Decoder > MPEG4Part10 to display the screen.
Figure 377 TR-135: STBService: Capabilities: MPEG4Part10
Table 213 TR-135: STBService: Capabilities: MPEG4Part2 ProfileLevel Settings
PARAMETER NAME VALUE
Profile This displays the MPEG4 part 2 profile.
Level This displays the MPEG4 part 2 level.
MaximumDecodingCa
pability
This displays the maximum decoding capability for this video standard in
kilobits per second.