User's Manual

Chapter 22 Voice Service
Vantage Access User’s Guide
391
Figure 352 TR-104: VoiceService: VoiceProfile: CallFeatures
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 196 TR-104: VoiceService: VoiceProfile: CallingFeatures
PARAMETER NAME VALUE
CallerIDEnable This field displays whether the device is to send the caller ID information on
outgoing calls.
CallerIDNameEnable This field displays whether the device is to send the caller name information
on outgoing calls.
CallerIDName This field displays the name to identify the caller on the device.
CallWaitingEnable This field displays whether the call waiting feature is enabled (1) on the
device.
CallWaitingStatus This field displays the status (Disabled, Idle, SecondaryRinging,
SecondaryConnecting or SecondaryConnected) of the call waiting feature.
MaxSessions This field displays the maximum number of simultaneous conference calls
allowed on the device.
ConferenceCallingStat
us
This field displays the status of the managed conference calls on the device.
ConferenceCallingSes
sionCount
This field indicates the number of active conference calls on the device.
This field displays 0 to indicate that the device has no call sessions.
1 means a single call is in progress through the device.
A number larger than 1 indicates multiple calls in progress through the device.
CallForwardUnconditi
onalEnable
This field displays whether the call forwarding feature is enabled on the
device.
CallForwardUnconditi
onalNumber
This field displays the number to which all incoming calls are forwarded on the
device when the call forwarding feature is enabled.