User's Manual

Chapter 22 Voice Service
Vantage Access User’s Guide
360
22.3.1 SIP Setup
You can view and configure SIP settings in the SIP screen.
1 Select a registered device in the Device List window and click Configuration > Device
> Services > VoiceService.
2 Click a number and Capabilities.
3 Click SIP to display the screen.
Figure 305 TR-104: VoiceService: Capabilities: SIP
The following table describes the fields in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
RingDescriptionsEdita
ble
This field displays whether you can change the ring description and the ring
pattern tables.
PatternBasedRingGe
neration
This field displays whether the device supports ring generation based on tone
patterns.
RingPatternEditable This field displays whether you can change the ring pattern table.
FileBasedRingGenera
tion
This field displays whether the device supports ring generation based on file
playback.
RingFileFormats This field displays the list of ring file formats the device supports.
DigitMap This field displays whether the device supports the digimap parameters.
NumberingPlan This field indicates whether numbering plan configuration is supported on the
device or not.
ButtonMap This field indicates whether button map configuration is supported on the
device or not.
VoicePortTests This field indicates whether the voice port testing feature is supported on the
device or not.
Table 166 TR-104: VoiceService: Capabilities (continued)
PARAMETER NAME VALUE
Table 167 TR-104: VoiceService: Capabilities: SIP
PARAMETER NAME VALUE
Role This field displays the operation mode of the device in the network.
Extensions This field displays the SIP extension methods supported on the device.