User's Manual

Chapter 19 General Device Setup
Vantage Access User’s Guide
304
19.11.9 Queue
Use the Queue screen to view the queue table list on the device. Refer to Section 11.2.4 on
page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > QueueManagement > Queue.
Figure 246 TR-098 Amendment 1: QueueManagement: Queue
19.11.10 Queue Details
Use the detailed Queue screen to view and configure the queue table entry on the device.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > QueueManagement > Queue. Click a number to display the
screen.
CommittedBurstSize This field displays the committed burst rate (in bytes) for this entry.
ExcessBurstSize This field displays the excess burst rate (in bytes) for this entry.
PeakRate This field displays the peak rate (in bits/sec) allowed for this entry.
PeakBurstSize This field displays the peak burst rate (in bytes) for this entry.
MeterType This field displays the traffic measurement method to use for this entry.
PossibleMeterTypes This field displays the comma-separated list of supported traffic measurement
types.
ConformingAction This field displays how the device is to handle conforming traffic.
PartialConformingAc
tion
This field displays how the device is to handle partially conforming traffic.
NonConformingActio
n
This field displays how the device is to handle non-conforming traffic.
CountedPackets This field displays the number of packets as a result of the count meter action.
CountedBytes This field displays the number of bytes as a result of the count meter action.
Table 134 TR-098 Amendment 1: QueueManagement: Policer: Details (continued)
LABEL DESCRIPTION