User's Manual

Chapter 19 General Device Setup
Vantage Access User’s Guide
295
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
19.11.1 Queue Classification
Use the Classification screen to view the classification table list on the device. Refer to
Section 11.2.4 on page 132 for other field descriptions.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > QueueManagement> Classification.
Table 130 TR-098 Amendment 1: QueueManagement
LABEL DESCRIPTION
Enable This field displays whether queue management is activated or not.
MaxQueues This field displays the maximum number of queues on the device.
MaxClassificationEnt
ries
This field displays the maximum number of entries in the classification table.
ClassificationNumbe
rOfEntries
This field displays the number of entries currently in the classification table.
MaxAppEntries This field displays the maximum number of entries in the application table.
AppNumberOfEntrie
s
This field displays the number of entries currently in the application table.
MaxFlowEntries This field displays the maximum number of entries in the flow table.
FlowNumberOfEntrie
s
This field displays the number of entries currently in the flow table.
MaxPolicerEntries This field displays the maximum number of entries in the policer table.
PolicerNumberOfEnt
ries
This field displays the number of entries currently in the policer table.
MaxQueueEntries This field displays the maximum number of entries in the queue table.
QueueNumberOfEnt
ries
This field displays the number of entries currently in the queue table.
DefaultForwardingP
olicy
This field displays the index number of the forwarding policy table associated to
the traffic.
DefaultPolicer This field displays the index number of the default policer table for traffic without
a specified classifier.
DefaultQueue This field displays the index number of the default queue table for traffic without
a specified classifier.
DefaultDSCPMark This field displays the default DiffServ Code Point (DSCP) for traffic without a
specified classifier.
DefaultEthernetPriori
tyMark
This field displays the default priority level for traffic without a specified
classifier.
AvailableAppList This field displays a comma-separated list of protocols supported by the
application table.