User's Manual

Chapter 19 General Device Setup
Vantage Access User’s Guide
280
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
19.4 Device Configuration
Display the DeviceConfig screen to view general information about the configuration file on a
device.
Click Data Model > InternetGatewayDevice > DeviceConfig.
Figure 219 TR-098 Amendment 1: DeviceConfig
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
19.5 Management Server
Use the Management Server screen to configure settings on the device to connect to the
Vantage Access server.
Click Data Model > InternetGatewayDevice > ManagementServer.
Table 117 TR-098 Amendment 1: VendorConfigFile: Details
PARAMETER
NAME
VALUE
Name This field displays the name of the vendor configuration file applied to the device.
Version This field displays the version number of the vendor configuration file.
Date This field displays the time and date the vendor configuration file was applied on
the device.
Description This field displays a description about the vendor configuration file.
Table 118 TR-098 Amendment 1: DeviceConfig
PARAMETER
NAME
VALUE
PersistentData This field displays the configuration data that must remain intact after a device
system reboot.
ConfigFile This field displays the name of the vendor specific configuration file used for the
device.