User's Manual

Chapter 18 WAN Device
Vantage Access User’s Guide
261
18.11 WAN Ethernet Link Configuration
The WANEthernetLinkConfig screen displays the Ethernet link status (Up, Down or
Unavailable) in the EthernetLinkStatus field. Refer to Section 11.2.4 on page 132 for other
field descriptions.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANEthernetLinkConfig to display the screen as shown.
Figure 203 TR-098: WAN Device: WANEthernetLinkConfig
18.12 WAN POTS Link Configuration
You can view the WAN POTS connection status in the WANPOTSLinkConfig screen. The
POST connection is used for dialing to the ISP for Internet access.
1 Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice.
2 Click a number and WANConnectionDevice.
3 Click a number and WANPOTSLinkConfig to display the screen as shown.
Figure 204 TR-098: WAN Device: WANPOTSLinkConfig