User's Manual

Chapter 18 WAN Device
Vantage Access User’s Guide
250
Select a registered device in the Device List window and click Data Model >
InternetGatewayDevice > WANDevice. Click a number and WANDSLInterfaceConfig to
display the screen.
Figure 191 TR-098: WAN Device: WANDSLInterfaceConfig
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 99 TR-098: WAN Device: WANDSLInterfaceConfig
PARAMETER NAME VALUE
Enable This field displays 1 to indicate that the link is active; otherwise, it displays
0.
Status This field displays the link status.
ModulationType This field displays the modulation method used on the link.
LineEncoding This field displays the line encoding method used to establish a connection
to the ISP.
DataPath This field displays whether the link uses fast (lower latency) or interleave
(lower error rate) data path.
InterleaveDepth This field is applicable when the DataPath field shows Interleave.
This field displays the interleaved depth.
LineNumber This field displays the number of the line pair used for the connection. For
example, 1 means the inner most pair.