User's Manual

Chapter 16 General Device Setup
Vantage Access User’s Guide
213
Figure 147 TR-098: Layer2Bridging: Marking
16.9.6 Marking Table Details
Use the detailed Marking screen to view and configure the marking table entry on the device.
Select a registered device in the Device List window and click Provision > Data Model >
InternetGatewayDevice > Layer2Bridging > Marking. Click a number to display the
screen.
Figure 148 TR-098: Layer2Bridging: Marking: Details
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 77 TR-098: Layer2Bridging: Marking: Details
LABEL DESCRIPTION
MarkingKey This field displays the index number of the marking table entry.
MarkingEnable This field displays whether the marking table entry is activated or not.
MarkingStatus This field displays the status of the marking table entry.
MarkingBridgeRefer
ence
This field displays the index number of the bridge table entry associated with
this marking table entry.
MarkingInterface This field displays the name of the interface to which the device applies this
marking table entry.
VLANIDUntag This field displays whether the device removes the VLAN tag from outgoing
packets on the interface.
VLANIDMark This field displays the VLAN ID of the outgoing packets to which this marking
table entry is to apply.
EthernetPriorityMark This field displays the Ethernet priority level to add to incoming packets on the
interface.
-1 means that the device does not change the priority level assigned by the
classifier.
EthernetPriorityOver
ride
This field displays whether the priority level marking is to apply to all packets on
the interface.