User's Manual

Chapter 16 General Device Setup
Vantage Access User’s Guide
201
16.3 Device Configuration
Display the DeviceConfig screen to view general information about the configuration file on a
device.
Click Provision > Data Model > InternetGatewayDevice > DeviceConfig.
Figure 133 TR-098: DeviceConfig
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
16.4 Vendor Configuration File
The VendorConfigFile screen displays the name of the vendor configuration file and the time
it was first applied on the device. Refer to Section 11.2.4 on page 132 for other field
descriptions.
Click Provision > Data Model > InternetGatewayDevice > DeviceInfo >
VendorConfigFile. Click on a file name to display detailed information.
UpTime This field displays the time (in seconds) since the device was last restarted.
FirstUseDate This field displays the time and date the device first established a network
connection.
DeviceLog Enter additional information for this device.
VendorConfigFile
NumberOfEntries
This field displays the number of configuration files.
Table 66 TR-098: DeviceInfo (continued)
PARAMETER
NAME
VALUE
Table 67 TR-098: DeviceConfig
PARAMETER
NAME
VALUE
PersistentData This field displays the configuration data that must remain intact after a device
system reboot.
ConfigFile This field displays the name of the vendor specific configuration file used for the
device.