User's Manual

Chapter 15 WAN Device
Vantage Access User’s Guide
172
15.2 WAN Common Interface Configuration
You can view basic common connection status in the WANCommonInterfaceConfig screen.
Select a registered device in the Device List window and click InternetGatewayDevice >
WANDevice. Click a number and WANCommonInterfaceConfig to display the screen.
Figure 103 TR-069: WAN Device: WANCommonInterfaceConfig
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 47 TR-069: WAN Device: WANCommonInterfaceConfig
PARAMETER NAME VALUE
EnabledForInternet This field displays 1 to indicate that the WAN interface is enabled for
Internet access; otherwise, the field displays 0.
WANAccessType This field displays the type of connection for Internet access on the
WAN interface.
Layer1UpstreamMaxBitRate This field displays the maximum upstream transmission rate in bits
per second.
Layer1DownstreamMaxBitRate This field displays the maximum download transmission rate in bits
per second.
PhysicalLinkStatus This field displays the link status. Possible states are Up, Down,
Initializing and Unavailable.
WANAccessProvider This field displays the name of the ISP providing the Internet access
service.
TotalBytesSent This field displays the total number of bytes transmitted.
TotalBytesReceived This field displays the total number of bytes received.
TotalPacketsSent This field displays the total number of packets transmitted.
TotalPacketsReceived This field displays the total number of packets received.
MaximumActiveConnections This field displays the maximum number of connections allowed on
the device for Internet access.
NumberOfActiveConnections This field displays the number of active connections on the device for
Internet access.