User's Manual

Chapter 14 LAN Device
Vantage Access User’s Guide
155
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 37 TR-069: LAN Device: LANHostConfigManagement
PARAMETER NAME VALUE
DHCPServerConfigurable This field displays 1 if Vantage Access can change the default DHCP
server setting on the LAN interface.
This field displays 0 to have the device use the default DHCP server
settings on the LAN. No changes are allowed.
DHCPServerEnable This field displays 1 to indicate that the DHCP server setting on the LAN
interface is enabled.
This field displays 0 to indicate that the DHCP server setting on the LAN
interface is disabled.
DHCPRelay This field displays 1 when the device is set to act as a DHCP relay on the
LAN. The device will forward DHCP requests from the clients to the actual
DHCP server on the LAN. In this case, you must set up a DHCP server.
This field displays 0 when DHCP relay is deactivated. In this case, the
device acts as a DHCP server.
MinAddress This field displays the first IP address in the DHCP IP pool the DHCP
server assigns to a DHCP client on the LAN.
MaxAddress This field displays the last IP address in the DHCP IP pool the DHCP
server assigns to a DHCP client on the LAN.
ReservedAddresses This field displays the IP address(es) in the DHCP IP pool that is reserved
and not assigned to a DHCP client on the LAN.
IP addresses are separated by a comma (,).
SubnetMask This field displays the subnet mask for the DHCP clients.
DNSServers This field displays the IP address of the DNS server whose information
the device sends to the DHCP clients.
DNS server IP addresses are separated by a comma (,).
DomainName This field displays the domain name the device is to assign to DHCP
clients.
IPRouters This field displays the IP address of the default gateway on the LAN.
IP addresses are separated by a comma (,).
DHCPLeaseTime This field displays the lease time (in seconds) for the assigned IP address
to DHCP client(s).
This field displays -1 to indicate that a lease time never times out.
UseAllocatedWAN This field displays how the device is to assign DHCP client IP
address(es).
Normal means the device is set to assign IP addresses from the DHCP
IP pool configured.
UseAllocatedSubnet means the device is set to assign IP addresses
from the range of WAN IP addresses provided by your ISP.
Passthrough means the device is set to assign IP addresses to DHCP
clients whose MAC address is marked for passthrough.
AssociatedConnection This field is applicable if the UseAllocatedWAN field displays
UseAllocatedSubnet or Passthrough.
This field displays the complete hierarchical name for the default WAN
interface to which this connection is associated.
PassthroughLease This field displays the lease time (in seconds) to DHCP clients when the
WAN IP address is passthrough.
PassthroughMACAddress This field is applicable if you select Passthrough in the
UseAllocatedWAN field.