User's Manual

Chapter 13 General Device Setup
Vantage Access User’s Guide
151
13.9 LAN Configuration Security
Use the LANConfigSecurity screen to display and configure the password to allow LAN
access on the device for auto-configuration settings. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Select a registered device in the Device List window and click Provision >
InternetGatewayDevice > LANConfigSecurity.
Figure 77 TR-069: LANConfigSecurity
13.10 IP Ping Diagnostics
Use the IPPingDiagnostics screen to configure the ping test settings on a device.
Select a registered device in the Device List window and click Provision
InternetGatewayDevice > IPPingDiagnostics.
Figure 78 TR-069: IPPingDiagnostics
The following table describes the labels in this screen. Refer to Section 11.2.4 on page 132 for
other field descriptions.
Table 35 TR-069: IPPingDiagnostics
LABEL DESCRIPTION
DiagnosticsState This field displays the ping test result.
Interface This field displays the hierarchical name of the interface for ping diagnostics.
For example, “InternetGatewayDevice.WANDevice.1.-
WANConnectionDevice.1.WANPPPConnection.1”
You can enter up to 256 characters for the interface name.