User's Manual

Chapter 9 Template Management
Vantage Access User’s Guide
125
9.5 Loading a Template
" Applying a template replaces the current configuration on the specified device
or all devices in a group.
Use the Load From Template screen to apply a template to a device or all devices in a group.
When loading a device-specific template, Vantage Access automatically applies the parameter
settings to the device whose OUI and serial number matches the ones in the template.
Click Template > Load Template. Select a template in the list and click Load.
Figure 50 Template > Load Template
The following describes the labels in this screen.
Template
Name
Enter a descriptive name (up to 128 characters (0-9, a-z, A-Z, _ or - without spaces))
for the new template.
Description Enter a short description (up to 256 characters (0-9, a-z, A-Z, _ or - without spaces)) for
the new template.
Back Click this to return to the previous screen.
Note: This button displays only when you are saving a group’s
template.
Save Click Save to create a new template with the settings.
Reset Click Reset to start configuring this screen again.
Table 17 Provision Manager > Pre-Provision > Template > Save (continued)
LABEL DESCRIPTION
Table 18 Template > Load Template
LABEL DESCRIPTION
Entries Per
Page
Select how many entries you want to display in a page.
# Select this check box and click Load to apply the selected template.
Select Select All to mark all entries.
Template
Name
This field displays the descriptive name of a template.