User's Manual

Chapter 9 Template Management
Vantage Access User’s Guide
123
9.3.2 Modifying a Parameter Value
You can change the value of a parameter in a template in the Modify Parameter screen. In the
template Edit screen, click the modify icon
() for the selected parameter to display the
Modify Parameter screen. The OUI-SN field displays in the screen if you select a device-
specific template.
Figure 48 Provision Manager > Template > Management > Edit > Modify Parameter
The following table describes the labels in this screen.
9.4 Template Creation
The following outlines the steps to creating a new template.
1 Select a registered device from the Device List.
2 Click Template > Save As Template.
3 Select the parameters of the device you want to include in a template.
4 Save the settings to a new template.
9.4.1 Selecting Parameters and Creating a Template
After selecting a device for a template, you can then select the parameters and create the new
template in this screen. Select a registered device in the Device List and click Template >
Save as Template.
Table 16 Provision Manager > Template > Management > Edit > Modify Parameter
LABEL DESCRIPTION
Template
Name
This read-only field displays the name of the template to which this parameter belongs.
Parameter
Name
This field displays the descriptive name for a parameter.
OUI-SN This field is available in a device-specific template.
This field displays the OUI and the unique serial number of the device.
Type This field displays the value type for the parameter.
Value Specify the setting for the parameter.
Back Click Back to return to the previous screen without saving the settings.
Apply Click Apply to save the settings.
Reset Click Reset to start configuring this screen again.