User's Manual

Chapter 8 Device Manipulation
Vantage Access User’s Guide
116
2 Once connected to the network, the ZyXEL device automatically locates and registers to
the Vantage Access server.
" For initial setup, the registration process may take several minutes (depending
on your network condition).
3 Check the device status in the Device List panel. If the status is Registered, this
indicates that device registration is successful and that Vantage Access has stored the
ZyXEL device information to its database.
4 You can now select the device and use the Provision screens in Vantage Access to
remotely configure this ZyXEL device.
8.2 Renaming Devices
This section describes how to rename one or more of the devices managed by Vantage Access.
8.2.1 Renaming a Single Device
To rename a single device, select the device in the Device List, right-click on the device and
select Rename. The following screen displays.
Figure 42 Rename a Single Device
Enter the new Device Name and click Save.
8.2.2 Renaming Multiple Devices
To import a CSV file to rename multiple devices, click the Provision Manager tab, then
Device Manipulation > Rename Devices. The following screen displays.
wan tr save Saves the settings.
wan tr reset Set the device to register to the Vantage Access server.