User's Manual

Chapter 5 Device Status
Vantage Access User’s Guide
104
5.1.1 The Device Status > Subscriber Screen
Use this screen to configure information about a device’s subscriber. This information displays
in the Device Status screen.
To display this screen, log into Vantage Access and click the Provision Manager in the
control panel, select a device in the Device List panel, click Device Status, then click the edit
icon ( ). The following screen displays.
Figure 36 Device Status > Subscriber
UDP
ConnectionR
equestURL
This field displays the URL of the device to which Vantage Access sends a UDP
(User Datagram Protocol) connection request.
Protocol This field displays whether Vantage Access uses TCP or UDP to request a
connection.
ConnectionR
equestUsern
ame
This field displays the user name Vantage Access uses to access the device.
This is required if you want Vantage Access to initiate a connection and access the
device.
ConnectionR
equestPassw
ord
This field displays the password associated with the user name above.
Subscriber Information
Edit ( ) Click this to edit this device’s subscriber information. The Device Status >
Subscriber screen displays.
Subscriber
Name
This displays the subscribers name for this device.
Email This displays the subscriber’s e-mail address for this device.
Address This displays the subscriber’s street address for this device.
Telephone
Number
This displays the subscriber’s telephone number for this device.
City This displays the subscriber’s city for this device.
State This displays the subscriber’s state, region or province for this device.
Postal This displays the subscriber’s postal or zip code for this device.
Country This displays the subscriber’s country for this device.
Table 7 Provision Manager > Device Status (continued)
LABEL DESCRIPTION