User's Manual

24 Status Registers & Result Codes
1 CONNECT V V V V V @ $ #
2 RING ** V V V V V V V V
3 NO CARRIER V V V V V V V V
4 ERROR V V V V V V V V
5 CONNECT 1200 % % % % @ $ #
6 NO DIAL TONE V V V V V
7 BUSY V V V V V
8 NO ANSWER V V V V V
10 CONNECT 2400 % % % % @ $ #
11 CONNECT 4800 % % % % @ $ #
12 CONNECT 9600 % % % % @ $ #
13 CONNECT 14400 % % % % @ $ #
14 CONNECT 19200 % % % % @ $ #
15 CONNECT 16800 % % % % @ $ #
18 CONNECT 57600 % % % % @
24 CONNECT 7200 % % % % @ $ #
25 CONNECT 12000 % % % % @ $ #
26 CONNECT 1200/75 % % % % @ $ #
27 CONNECT 75/1200 % % % % @ $ #
28 CONNECT 38400 % % % % @
29 CONNECT 21600 % % % % @ $ #
30 CONNECT 24000 % % % % @ $ #
31 CONNECT 26400 % % % % @ $ #
32 CONNECT 28800 % % % % @ $ #
33 CONNECT 115200 % % % % @
35 CONNECT 33600 % % % % @ $ #
Result Code Chart Symbol Reference:
V Supported
% Reports the DTE Speed as: <cr><lf>CONNECT DTE_Speed<cr><lf>
@ CONNECT DTE_Speed/Protocol DCE_Speed/Error_Control †
Example: CONNECT 38400/V.32bis 14400/V.42bis
$ <cr><lf>CONNECT DCE_Speed[/Error_Code]<cr><lf>
Example: CONNECT 14400/ARQ
# CONNECT DCE _Speed/Error_Code/Error_Control †
Example: CONNECT 14400/ARQ/ MNP5
† Data compression included. 'SREJ' is appended if a V.42 connection with selective
reject is established.
Result Code Field Descriptions
Field Name Possible Values
Error_Code NONE, ARQ
Error_Control LAPM, V42
(This field will not show if no error control is negotiated)
Data_Compression V42b
DCE_Speed All possible DCE speeds supported
DTE_Speed All possible DTE speeds supported