User's Manual

ZyWALL 10/50 Internet Security Gateway
Firmware and Configuration File Maintenance 21-7
Step 2. The following screen indicates that the Xmodem download has started.
Figure 21-4 System Maintenance — Starting Xmodem Download Screen
Step 3. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
Figure 21-5 Backup Configuration Example
Step 4. After a successful backup you will see the following screen. Press any key to return to the SMT
menu.
Figure 21-6 Successful Backup Confirmation Screen
21.3 Restore Configuration
This section shows you how to restore a previously saved configuration. Note that this function erases the
current configuration before restoring a previous back up configuration; please do not attempt to restore
unless you have a backup configuration file stored on disk.
** Backup Configuration completed. OK.
### Hit any key to continue.###
Type a location for storing
the configuration file or click
Browse to look for one.
Choose the Xmodem
p
rotocol.
Then click Receive.
You can enter ctrl-x to terminate operation any time.
Starting XMODEM download...