User's Manual

ZyWALL 10/50 Internet Security Gateway
12-2 Using the ZyWALL Web Configurator
12.2 Enabling the Firewall
Click Advanced, Firewall, Configuration and then the Config tab. Enable (or activate) the firewall by
clicking the Firewall Enabled check box as seen in the following screen.
Figure 12-1 Enabling the Firewall
12.3 E-mail
The E-mail screen show next, allows you to specify your mail server, where e-mail alerts should be sent as
well as when and how often they should be sent.
12.3.1 Alerts
Alerts are reports on events, such as attacks, that you may want to know about right away. You can choose to
generate an alert when an attack is detected in the Attack Alert screen (Figure 12-4 - check the Generate
alert when attack detected checkbox) or when a rule is matched in the Rule Config screen (see Figure