User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
Remote Node Configuration 5-5
Move the cursor to the Edit IP field, press [SPACE BAR] to select Yes, then press [ENTER] to display
Menu 11.3 – Remote Node Network Layer Options shown below.
Figure 5-2 Remote Node Network Layer Options
The next table explains fields in Menu 11.3
- Remote Node Network Layer Options.
Table 5-2 Remote Node Network Layer Options
FIELD DESCRIPTITON EXAMPLE
IP Address
Assignment
Press [SPACE BAR] and then [ENTER] to select Dynamic if the remote
node is using a dynamically assigned IP address or Static if it is using a
static (fixed) IP address. You will only be able to configure this in the
ISP node (also the one you configure in menu 4), all other nodes are
set to Static.
Static
Rem IP Addr This is the IP address you entered in the previous menu.
Rem Subnet
Mask
Type the subnet mask assigned to the remote node.
My WAN Addr Some implementations, especially UNIX derivatives, require separate
IP network numbers for the WAN and LAN links and each end to have a
unique address within the WAN network number. In that case, type the
IP address assigned to the WAN port of your ZyAIR.
Network
Address
Translation
Press [SPACE BAR] and then [ENTER] to select Full Feature if you
have multiple public WAN IP addresses for your ZyAIR.
Full
Feature
Menu 11.3 - Remote Node Network Layer Options
IP Address Assignment= Static
Rem IP Addr= 0.0.0.0
Rem Subnet Mask= 0.0.0.0
My WAN Addr= 0.0.0.0
Network Address Translation= None
Metric= 1
Private= No
RIP Direction= None
Version= N/A
Multicast= None
Enter here to CONFIRM or ESC to CANCEL: