User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
4-8 Wireless LAN Security Setup
Figure 4-7 Menu 14- Dial-in User Setup
Step 2. Type a number and press [ENTER] to edit the user profile.
Figure 4-8 Menu 14.1- Edit Dial-in User
The following table describes the fields in this screen.
Table 4-4 Menu 14.1- Edit Dial-in User Field Description
FIELD DESCRIPTION
User Name Enter a username up to 31 alphanumeric characters long for this user profile.
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable the user profile.
Password Enter a password up to 31 characters long for this user profile.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
4.5 MAC Address Filtering
Your ZyAIR checks the MAC address of the wireless client device against a list of allowed or denied MAC
addresses. However, intruders could fake allowed MAC addresses so MAC-based authentication is less
secure than EAP authentication.
Menu 14 - Dial-in User Setup
1. ________ 9. ________ 17. ________ 25. ________
2. ________ 10. ________ 18. ________ 26. ________
3. ________ 11. ________ 19. ________ 27. ________
4. ________ 12. ________ 20. ________ 28. ________
5. ________ 13. ________ 21. ________ 29. ________
6. ________ 14. ________ 22. ________ 30. ________
7. ________ 15. ________ 23. ________ 31. ________
8. ________ 16. ________ 24. ________ 32. ________
Enter Menu Selection Number:
Menu 14.1 - Edit Dial-in User
User Name= test
Active= Yes
Password= ********
Press ENTER to Confirm or ESC to Cancel: