User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
4-6 Wireless LAN Security Setup
Table 4-2 IEEE802.1X System Security Field Descriptions
FIELD DESCRIPTION
ReAuthentica-
tion Timer
(in seconds)
Specify the time interval between the RADIUS server’s authentication checks of
wireless users connected to the network.
This field is activated only when you select Auto authentication control. The default
time interval is 1800 seconds.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.
Once you enable the EAP authentication, you need to specify the external RADIUS server or create local
user accounts for authentication.
4.3.5 Configuring External RADIUS Server
From Menu 23- System Security, enter 2 to display Menu 23.2 - System Security-RADIUS Server as
shown next.
Figure 4-6 Menu 23.2 System Security - External Server
The following table describes the fields in this screen.
Table 4-3 Menu 23.2 System Security - External Server Field Description
FIELD DESCRIPTION EXAMPLE
Authentication Server
Active
Press [SPACE BAR] to select Yes and press [ENTER] to enable
user authentication through an external authentication server.
Select No to enable user authentication using the local user
profile on the ZyAIR.
No
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= No
Server Address= ?
Port #= 1812
Key= ?
Accounting Server:
Active= No
Server Address= ?
Port #= 1813
Key= ?