User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
Wireless LAN Security Setup 4-5
Step 5. The RADIUS server checks the user information against its user profile database and sends an
“accept” or a “deny” packet to ZyAIR.
Step 6. When ZyAIR receives the “accept” package, the client port is placed into an authorized state
and traffic is allowed to proceed. Otherwise, no traffic is allowed.
4.3.4 Enable EAP Authentication on Your ZyAIR
Follow the steps below to enable EAP authentication on your ZyAIR.
Step 1. From the main menu, enter 23 to display Menu23 – System Security.
Figure 4-4 Menu 23 – System Security
Step 2. Enter 4 to display Menu 23.4 – System Security – IEEE802.1X.
Figure 4-5 Menu 23.4- System Security – IEEE802.1X
The following table describes the fields in this screen.
Table 4-2 IEEE802.1X System Security Field Descriptions
FIELD DESCRIPTION
Authentication
Control
Press [SPACE BAR] to select from Forced Authorized, Forced Unauthorized or
Auto. The default is Forced Authorized.
Select Auto to authenticate all wireless clients.
Select Force Authorized to allow any user access to your wireless network without
authentication.
Select Force UnAuthorized to deny all user access to your wireless network.
Menu 23.4 - System Security - IEEE802.1X
Authentication Control= Force Authorized
ReAuthentication Timer (in second)= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 23 - System Security
1. Change Password
2. RADIUS Server
4. IEEE802.1X