User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

4-2 Wireless LAN Security Setup

Step 1. From the main menu, enter 3 to display Menu 3 – Lan Setup.

Step 2. Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Figure 4-2 Wireless LAN Setup

The following table describes the WEP related fields in this screen. For wireless LAN field descriptions

refer to section on Wireless LAN Setup.

Table 4-1 Wireless LAN Setup Field Description

FIELD DESCRIPTION EXMAPLE

WEP

WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized

wireless stations from accessing data transmitted over the wireless network.

Select Disable to allow wireless clients to communicate with the access points

without any data encryption.

Select 64-bit WEP or 128-bit WEP to enable data encryption.

Disable

Default

Key

Enter the key number (1 to 4) in this field. Only one key cab be enabled at any

one time.

Key 1 to

Key 4

If you chose 64-bit WEP in the WEP Encryption field, then enter any 5

characters (ASCII string) or 10 hexadecimal digits ("0-9", "A-F") preceded by 0x

for each key.

If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters

(ASCII string) or 26 hexadecimal digits ("0-9", "A-F") preceded by 0x for each key.

There are four data encryption keys to secure your data from eavesdropping by

unauthorized wireless users. The values for the keys must be set up exactly the

same on the access points as they are on the wireless client computers.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to

cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.

Menu 3.5 - Wireless LAN Setup

ESSID= 432545

Hide ESSID= No

Channel ID= CH11 2462MHz

RTS Threshold= 2432

Frag. Threshold= 2432

WEP= Disable

Default Key= N/A

Key1= N/A

Key2= N/A

Key3= N/A

Key4= N/A

Edit MAC Address Filter= No

Edit Roaming Configuration= No